Exmark Kohler ECV749 EFI - 60" Series 4 Deck


$17,759.00


LAZER Z S-SERIES

More power. More features. More productivity.
With the top-rated Lazer Z S-Series of zero turn riders, you can choose from eight
different engines, including an eco-friendly, Electronic Fuel Injection (EFI),
propane option. Four UltraCutâ„¢ Series 4 cutting deck sizes are available in 52,
60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-
welded top and a 7-gauge side skits. All with welded spindle mounting sites and
full-floating 4-point suspension with four adjustable anti-scalp rollers.
Select 2018 Lazer Z S-Series models offer Smart Controller. This easy-to-use
interface has a wealth of user data like fuel level, interlock status, PTO and
total hours, maintenance reminders and machine health status.

Equipment

Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter
cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Turf Master®
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft.
Adjustable dampeners (3 positions) to customize drive responsiveness. Also
adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration
Control material. Mounted on innovative Seat Isolation System that provides
operator isolation in all three planes of motion as well as fore-aft slide and seat
flip-up.
Electrical 12-volt battery with 20-amp alternator.
Onboard Intelligence Smart Controller

Power Components

Engine Brand Kohler®
Engine Model ECV749
Engine Displacement 747
Engine Series Commandâ„¢ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor
systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir,
spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch
motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0
mph (9.7 kmph) reverse.
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts
the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with
safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z S-Series 26.5 HP* Koh EFI ECV749 w/60" UltraCut
Series 4 Deck, Susp Seat & Wide Semi-Pneum
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by
the engine manufacturer in accordance with SAE J1940 or SAE J2723. As
configured to meet safety, emission and operating requirements, the actual
engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C
was laboratory rated at 3000 rpm by the engine manufacturer in
accordance with SAE J1995. As configured to meet safety, emission and operating
requirements, the actual engine horsepower on these mowers may be
significantly lower.

Decks

Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard,
with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-
gauge side skirt and 7-gauge formed and welded spindle mounting locations for
improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments
adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length

Dimensions

Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1249
  • Model: LZS749AKC604A1
  • Manufactured by: Exmark

To go with the items in your cart we also recommend...

Exmark MK606 60 Inch MULCH KIT FITS ALL 60 Inch 4 AND 6 SERIES
Exmark MK606 60 Inch MULCH KIT FITS ALL 60 Inch 4 AND 6 SERIES
$553.99
Be the first to write a review.  Write a Review.

Product 2/5

 Prev 
 All 
 Next 

This product was added to our catalog on Friday 13 July, 2018.



Website security