Exmark 36" TTS481CKA36300 ECS Controls

Made-to-order performance in a floating-deck, hydro-drive mower. With the Exmark Turf Tracer S-Series, you can choose from four rugged engines including the eco-friendly, Electronic Fuel Injection (EFI), propane Kohler® PCV680. Then, match that power to cutting decks ranging from 36 to 52 inches. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.

Specifications for model# TTS481CKA36300

Equipment

Drive Tires: 16 x 6.5-8, 4-ply Turf Master®

Drive Wheel Release: Allows unit movement without engine running.

Safety Package: Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine

Casters: .38" thick caster yoke arms

Steering Control: Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.

Front Caster Tires: 9 x 3.5-4, smooth-tread, semi-pneumatic.

Parking Brake: Lever-actuated mechanical compression.

Electrical: No battery, recoil start.

Cup Holder: No

Width: 47.5 in. (120.7 cm)

Length: 77.7 in. (197.4 cm)

Height: 42.0 in. (106.7 cm)

Power Components

Engine Brand: Kawasaki®

Engine Model: FS481V

Engine Type: Carbureted

Engine Series: V-Twin

Engine Speed: 3,600 rpm

Engine Displacement: 603

Air Filter: Standard Engine Manufacturer's air filter

Drive: Hydro-Drive

Drive Description: Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.

PTO Engagement: Electromagnetic 105 ft-lbs clutch.

Fuel Capacity: 5-gallon (18.9-L) fuel tank.

Fuel Indicator: None

Deck Lift: Manual lift with hairpin from hole to hole for position adjustment.

Carb Compliant: Yes

Fuel Type: Gas Carbureted

Decks

Deck Style Description: Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.

Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.

Deck Style: Floating Deck

Width/Cutting Deck: 36"

Cutting Heights: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

Blades: 2 Blades at 18.00" Length

Blade Tip Speed: Approximately 18,500 fpm.

Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.

Dimensions

Curb Weight: 573